Welcome to the PikkoBot Blog
· One min read
This is where we'll share field notes from running PikkoBot machines: real builds, calibration tricks, feeder firmware tweaks, and case studies from users.
What you'll find here
- Case studies — PCBs we've assembled, what worked, what didn't.
- Calibration deep dives — JUKI nozzle runout, fiducial vision tuning, feeder zero alignment.
- OpenPnP tips — config patterns, G-code recipes, debug techniques.
- Hardware mods — community-tested upgrades to the LumenPnP platform.
For step-by-step setup and reference documentation, see the PikkoBot Wiki. For browser-based hardware testing, use the Debug Tool.
Contributing
This blog is open. If you've solved a tricky calibration or have a build to share, email support@pikkobot.com.